Materials of Trade
 
Materials of Trade
  
The materials of trade are hazardous materials that are carried on motor vehicles for at least one
of the following purposes.
  • To protect the health and safety of the motor vehicle operator or passengers. (e.g. insect
    repellant, fire extinguishers)
  • To support the operation or maintenance of motor vehicles/auxiliary equipment. (e.g. engine
    starting fluid, gasoline, spare battery)
  • Carried by a private motor carrier to directly support a principal business that is not
    transportation. (e.g. academic and laboratory research, pest control, plumbing, painting)
In order to qualify for this exemption, the type of the material and the amount of the material are
also regulated. A material of trade is limited to the following DOT hazard classes only:
 
Hazard ​DOT Class ​Maximum Quantity by PG (Packing Group From DOT Hazmat Table) ​Examples
​Flammable Gasses ​Class 2, Division 2.1
l 220 lbs.
ll 220 lbs.
lll 220 lbs.​
Propane, Acetylene​
​Non-Flammable Gasses ​Class 2, Division 2.2
l 220 lbs.
ll 220 lbs.
lll 220 lbs.​
Nitrogen​
Flammable and combustible liquid​ ​Class 3
l 1lb / 1 Pint
ll 66 lbs / 8 gallons
lll 66 lbs / 8 gallons​
​ Solvents, Paints
Flammable solid​ ​Class 4, Division 4.1
l 1lb / 1 Pint
ll 66 lbs / 8 gallons
lll 66 lbs / 8 gallons​
​Charcoal
Spontaneously combustible​ ​Class 4, Division 4.3
ll 1 oz.
lll 1 oz.​
​Test Kits
​Oxidizer ​Class 5, Division 5.1
l 1lb / 1 Pint
ll 66 lbs / 8 gallons
lll 66 lbs / 8 gallons​
Bleaching Compounds​
​Organic Peroxide ​Class 5, Division 5.2 ​l 1lb / 1 Pint
ll 66 lbs / 8 gallons
lll 66 lbs / 8 gallons
Benzoyl Peroxide​
​Toxic Material ​Class 6, Division 6.1
l 1lb / 1 Pint
ll 66 lbs / 8 gallons
lll 66 lbs / 8 gallons​
Pesticides​
​Corrosive Material Class 8​ ​l 1lb / 1 Pint
ll 66 lbs / 8 gallons
lll 66 lbs / 8 gallons
Battery Acid, Muriatic Acid​
​Miscellaneous ​Class 9 ​l 1lb / 1 Pint
ll 66 lbs / 8 gallons
lll 66 lbs / 8 gallons
​Lithium Battery
​Other Regulated Material ​ORMD ​None ​Hair Spray, Nail Polish
 
If you are able to utilize the Material of Trade Exception continue below for packaging and
marking requirements, otherwise return to the flow chart for further shipping guidance.
 
 
Materials of Trade Packaging and Marking Requirements

In addition, the packaging and marking requirement for a Material of Trade material are as follows:
  • The packaging must be either the manufacturers original package or a package of equal or greater
    strength and integrity.
  • Packaging must be leak proof for liquids and gases and sift proof for solids.
  • Outer packaging is not required for receptacles such as cans or bottles that are secured against movement in cages, bins, boxes or compartments.
  • The package must be marked with a common name such as spray paint, or a proper shipping name from the Hazardous Material regulations, such as Isopropyl Alcohol.
  • Packages must be securely closed, secured against movement and protected against damage.
  • A non-bulk packaging other than a cylinder (including a receptacle transported without an outer
    packaging) must be marked with a common name or proper shipping name to identify the material it
    contains, including the letters "RQ" if it contains a reportable quantity of a hazardous substance.
  • A DOT specification cylinder (except DOT specification 39) must be marked and labeled as prescribed
    in this subchapter. Each DOT-39 cylinder must display the markings specified in § 178.65(i).
  • The operator of a motor vehicle that contains a material of trade must be informed of the presence of the hazardous material (including whether the package contains a reportable quantity) and must be informed of the requirements of this section.
  • The aggregate gross weight of all materials of trade on a motor vehicle may not exceed 200 kg (440
    pounds).
If you are able to utilize the Material of Trade Exception package and mark according to
requirements, otherwise return to flowchart for further shipping guidance.