Pre-Inspection Walk through Tips
PDF Version of Pre-Inspection Tips
Remove all Extension Cords and replace them with Power Strips with Over Current Protection Breakers.
Extension Cords not being used shall be disconnected from the outlet and properly coiled up.
No Power Strips can be plugged into another Power Strip or Extension Cord. Device used must be plugged directly into an outlet.
Repair/Replace Frayed Electric Cords and have any Junction Boxes or Electrical Covers replaced so that connections and wires are not exposed.
Have any Junction Boxes or Electrical Covers replaced so that connections and wires are not exposed.
Labeled Fire Doors cannot be propped open. Remove any prop open devices.
Properly secure any Gas Cylinders to prevent them from falling over by using Chain and or Straps to a fixed point.
Combustible Storage cannot be within 18 inches in rooms that are protected by Sprinklers and 24 inches without sprinkler.
Check Flame Retardant requirements for Curtains/Drapes in Assembly Spaces of 50 or more people and Lab Spaces.
Ensure that all Hallways and Stairwells are free of obstructions especially Combustible Material Storage.
Ensure that all Exit Signs are Illuminated and in Good Condition.
All Ceiling Tiles are in place and not broken
Ensure that all Fire and Life Safety equipment is accessible and not obstructed.
Maintain Unobstructed Exits and Egress.